Distribution hubs, terminals, aggregate yards and other high-traffic businesses organize the transportation of various goods. For these facilities, tracking the axle and gross vehicle weight (GVW) of incoming and outgoing trucks is necessary to ensure weight compliance, while also providing an efficient and effective way to track inventory. 

Weigh-In-Motion (WIM) technology is the ideal solution for locations with high traffic volume. WIM scales produce highly-accurate measurements, without the need to stop traffic, and have permanent in-ground and portable options. Semi-portable, static axle scales also minimize the impact of weighing operations on inbound and outbound traffic with drive-over or in-ground configurations

In-Ground WIM Scales

Capture vehicle weight dynamically at a permanent facility:
  • Small installation and operational footprint compared to full-length truck scale
  • 1-2% dynamic accuracy up to 6 mph (10 km/h)
  • Static Accuracy ±0.1%
  • Available components combine into standalone system
  • Integration into existing gate systems, if applicable
  • Capture individual axle and total vehicle weight
  • Available in capacities up to 100,000 lb (45,000 kg)

Intercomp’s in-ground WIM system tracks and displays individual axle weights in addition to gross vehicle weight (GVW). With a full-length truck scale, this data is hard to collect. The smaller weighbridge of the WIM system also requires less effort and time to install and maintain.

Common applications include businesses that receive aggregate and other bulk material, distribution hubs and terminals, and agricultural facilities.

LS-WIM Axle Scales Product Page

Portable WIM Scales

Portable WIM Scales can operate in dynamic or static mode:
  • System includes two scales, roll-up ramps and indicator
  • Deployable by two people in less than 15 minutes
  • Capture individual axle and total vehicle weight
  • 2-3% dynamic accuracy, ±0.5% static accuracy
  • Push-button conversion to static mode
  • RFX™ Wireless Weighing with cable backup
  • 60,000 lb (30,000 kg) individual axle capacity
Portable WIM is a hybrid system that brings together our experience in both WIM technology and our long history of developing innovative portable truck scales.

Common applications include railroad terminals, aftermarket vehicle outfitters and temporary aggregate sites.

LS630-WIM™ Product Page

Static Scales

Semi-Portable Axle Scales

Higher throughput of similarly configured vehicles:
  • Can be installed into pit with proper drainage
  • Integrate into existing scale systems
  • NTEP (National Type Evaluation Program) Class IIII-certified part numbers available
  • Signal outputs include RFX Wireless, digital and analog
  • Highly customizable
  • Weather sealed for prolonged outdoor use
  • Aluminum or steel construction
Axle Scales allow for maximum customization to tailor fit a particular application. Lengths can be constructed to encompass most axle configurations, including single, dual, triple and spread axles.

Common applications include landscaping material businesses, scrap metal yards and bulk recycling centers.

AX900™ Product Page

Brochures & App Notes
LS630-WIM™ Portable
Weigh-In-Motion Scales
Axle Scales
Axle Scales
LS-WIM for Inventory &
Gate Management
Axle Scales
LS-WIM Increases
Operational Efficiency
LS-WIM Helps Clean-n-Green
Stay Efficient
LS-WIM/LS20 Weigh-in-Motion
Axle Scale System
for Ports and Gates
Axle Scales
AX900™ Axle Scales
LS630-WIM™ Portable
Weigh-In-Motion Scales