Portable Truck Scales for Law Enforcement

Portable Weigh-In-Motion (WIM) and static scales for law enforcement allow for screening and direct enforcement of vehicle weight limitations. Portable Weigh-In-Motion scales allow for rapid processing of vehicles while identifying overweight axle or gross vehicle weight conditions. By utilizing our portable static scales or our WIM scale’s static mode, you can measure highly accurate weights that can be used for law enforcement within the United States.

Static and WIM Portable Weight Enforcement Scale Options

Intercomp’s WIM and Static Portable Truck Scales for ITS / Law Enforcement are built to the industry’s highest quality standards. The LS630-WIM™ and LS788-WIM™ portable models are designed to provide accurate weight measurements in both dynamic and static modes.

Get in touch with our sales team to determine which one of our weighing solutions is the best option for your business.

 Top

Portable Weigh-In-Motion scales are designed to operate in both WIM and static modes. This allows law enforcement officials to screen or enforce truck weights based on the laws of their jurisdictions. WIM (Weigh-In-Motion) semi-truck scales are easily transported in a trunk of a vehicle and can be set up by a single person in under 15 minutes. Additional advantages include:

• WIM site employs two scales, deployable ramps, and indicator or electronics
• Portable system for deployment where needed
• High degree of accuracy in WIM mode
• Static accuracy meets NTEP/OIML requirements, certified models available
• Wireless or cabled options

View our Portable Weigh-in-Motion Truck Scales for Law Enforcement

 Top

Our automated portable truck scales are perfect for roadside direct weight enforcement. These Scale Systems are modular and easily transportable, making them ideal for applications where large, permanent scales are not practical. Portable static scales operate together to weigh axles, axles groups, and Gross Vehicle Weights. Additional benefits include:

• Site employs two to six scales, (to capture adjacent axles on same plane)
• Included indicator or electronics
• Portable system for deployment where needed
• Static accuracy meets NTEP/OIML requirements, certified models available
• Solar panel charges batteries
• Wireless or cabled options

View our Portable Static Scales for Law Enforcement.

 

 Top

Portable scale systems are used worldwide for vehicle screening and enforcement applications. The following applications reflect the use potential of Intercomp’s Portable Enforcement Scales.

LS630-WIM™ Portable Low-Speed Weigh-In-Motion Scales for Law Enforcement

Transportation departments, ministries of transportation, and enforcement officials throughout the globe rely on Intercomp LS630-WIM™ Portable Weigh-In-Motion Scales for law enforcement purposes. Low-Speed Weigh-In-Motion Scales meet the requirements for accuracy of systems employed in enforcement WIM applications. They are Class lIII NTEP Certified for direct enforcement in static weighing mode and OIML R134 Certified in Weigh-In-Motion mode.

• LS630-WIM™ Scales for Screening & Enforcement
• LS630-WIM™: MN State Patrol Portable Screening
• LS630-WIM™: Novel In-Ground Use of Portable Scales

LTR788™ Tire Rating Scales for Law Enforcement

The LTR788™ Dual Wheel Load Scale was created for direct measurement of individual tire loading in a dual-tire configuration. Until now, there was no method to accurately weigh the tires individuallly, with the current procedure being to weigh both tires and divide by two. The LTR788™ enables service inspections of individual tire ratings and allows tire anomalies to be detected with a portable digital scale. Tire loading and tire conditions impact fuel economy and braking distance, and tire failure can lead to accidents and debris on roads.  The solar-powered, low-profile LTR788™ is the ideal system for deployment in portable enforcement sites.

• LTR788™ Scale Identifies Overrated Tires in Dual-Tire Setups

 Top

 Top